Polish Corrector

CORRÉCTOR 2.0 polish is a very versatile compound without silicones and fillers, water-based which, thanks to its Micro Abrasive Technology (M.A.T.) formula, guarantees a decisive cut and an excellent finish already in the cutting phase. It is ideal for both uses with a random orbital and a rotary press.

CORRÉCTOR 2.0 has 25% more cutting power than the old Polish Step 1 and 2, even on ceramic paint, it has an excellent comfort of use, a good gloss, and a finish comparable to the old Step 3. The compound is based on aqueous, does not smell of solvent, has zero dust technology, and allows for easy cleaning. It is very similar to an ALL IN ONE polish due to its versatility but without the use of fillers which only cover the scratches without removing them.

It is characterized by extreme comfort during all stages of processing. The product is ideal on both hard and soft surfaces. Worked with rotary and wool pad or with random orbital and microfiber pad, it has a fast and surprising cut. It was expressly developed to reduce and simplify cutting times while maintaining an exceptional result similar to a trimmer, thus saving the operator's time. Residues are easy and quick to remove. The product removes in-depth sanding marks up to P1500 and scratches, without covering them, even on scratch-resistant clear coats, OEM and repainted surfaces. It can also be used on transparent protective films, without damaging them, effectively eliminating the signs of aging.

HOW TO USE: distribute a little product at a time on a pad. With Rotary: initially work at 600-900 rpm, gradually increase up to 1500-1800 rpm and closing with light pressure at 600-900 rpm. With Rotorbital: spread the product evenly at speed 1-2 on an area of ​​40x40cm, go up to the maximum speed to polish until the polish is finished.